Frequency Characteristics | |
Frequency Range | 0.004Hz to 4MHz in 7 ranges | Ranges | x1, x10x, x100, x1K, x10k, x100k, x1M | Dial Accuracy | 5% of full scale | |
|
Waveforms | Sine, Square, Triangle, TTL Pulse | High Output | Amplitude: 15mV to 10V (into 50?) DC Offset: 0 to ±5 into 50? Impedance: 50? Attenuator: 30dB variable | Low Output | Amplitude: 0 to 1V (into 50?) DC Offset: 0 to ±0.5 (into 50?) Impedance: 50? Attenuator: 30dB variable | |
|
Frequency Range | 0.004Hz to 4MHz | Flatness | ±2.0 % (0.004Hz to 400KHz) ±10% (400KHz to 4MHz) | Harmonic Distortion | < 0.5 % on the 1K and 10K range 1% on the x1, x10, x 100 and x100K ranges 25dBc on the x1M range | |
|
Frequency Range | 0.004Hz to 4MHz | Rise/Fall Time | < 50ns into 50? (High output terminals) | Symmetry | ±1% to 100KHz ±5% to 4MHz | |
|
Linearity | > 99% to 200KHz | |
|
Modes | Operating modes (CW, Triggered, Gated, Sweep, Manually Triggered) | Trigger/Gate Input Level | TTL | Trigger/Gate Frequency Range | To 4MHz Max. | Trigger/Gate Minimum Pulse Width | < 50ns | |
|
Type | Linear and Log | Sweep Time | 30ms to 60 seconds continuously variable | Sweep Width | 1:1,000 linear 1:10,000 log continuously variable Sweep start and stop frequencies may be set with the Freq dial and the Freq. Stop control. | |
|
Sync | TTL level | GCV | Output proportional to the selected frequency, 0 to -5V | Sweep | 4V P-P | Impedance | 600? | |
|
Input Voltage | 0 to ±4V P-P will cause a 1:1,000 frequency change (linear) and 1:10,000 (Log) | Input Impedance | 2K? | |
|
Operating Temperature | 0 to 50°C (32 to 120°F) | Size | 3.5" (H) x 11.4" (W) x 10.6" (D) | Weight | 5 lbs | AC Line Voltage | 120/220V, 50/60Hz | Accessories | Manual, Line cord, BNC cable | |